Power Adapter
This article introduces the technical specifications and usage notes of the power adapters provided by Mech-Mind.
|
Technical Specifications of Power Adapter
The following table lists the technical specifications of the power adapters provided by Mech-Mind.
Model |
SINPRO-HPU101-108 |
|
|---|---|---|
Output |
DC voltage |
21–27 VDC |
Rated current |
4.76–3.70 A |
|
Rated power (max) |
100 W |
|
Input |
Voltage range |
90–260 VAC |
Frequency range |
47–63 Hz |
|
AC current |
1.2 A/100 VAC
|
|
Max inrush current |
50 A/100 VAC
|
|
Leakage current |
Earth leakage current < 0.25 mA/240 VAC |
|
Protection |
Overload |
110–150% rated output power |
Automatically recover after the overload condition is removed |
||
Over voltage |
112–132% rated output voltage |
|
Environment |
Operating temperature |
-10–70°C |
Operating humidity |
0–95%RH, non-condensing |
|
Storage temperature |
-40–85°C |
|
Storage humidity |
0–95%RH |
|
Usage Notes
-
The power adapter is grounded through the three-phase plug of the AC power cable, so no additional grounding is required.
-
When connecting the camera’s power interface, ensure a stable connection and leave some redundancy.
-
Ensure that all cables are connected before powering on the camera. After power is supplied, the camera’s PWR indicator light should be solid green. Otherwise, contact Mech-Mind Technical Support.