Firmware Upgrade Tool
With this tool, you can upgrade the laser profiler firmware on Ubuntu directly, simplifying the processing of firmware upgrade.
The firmware upgrade tool can be obtained from Mech-Mind Download Center.
The firmware upgrade tool consists of two parts: an executable file named firmware_upgrader and a compressed file named mmind_eye_v2.2.2.
Follow these steps to upgrade the firmware:
-
Execute the following command to give execute permission to the firmware upgrade tool.
chmod 777 xxx/firmware_upgrader -
Execute the following command to upgrade the firmware.
sudo xxx/firmware_upgrader xxx/mmind_eye_v2.2.2.zip-
Enter the path of firmware_upgrader first, followed by the path of mmind_eye_v2.2.2.zip. Otherwise, the firmware upgrade tool cannot be executed.
-
The two paths must be separated by a space. Otherwise, the firmware upgrade tool cannot be executed.
-
-
Input the index of the laser profiler whose firmware needs to be upgraded according to the instruction, and press Enter to connect to the laser profiler. If Upgrade Completed is displayed, the firmware was successfully upgraded.
| If the firmware upgrade failed, please retry or contact Technical Support. |