Associate Mech-Vision Measurement Project for the Feature

You need to associate a Mech-Vision measurement project for the feature.

A Mech-Vision project refers to a 3D vision project created in Mech-Vision to achieve a specific vision task. One or more Mech-Vision projects make up a Mech-Vision solution. Projects cannot be used independently and must be part of a solution.
A Mech-Vision measurement project is a specialized Mech-Vision project dedicated to measuring a specific feature of a part. When you use Mech-Metrics, you need to associate the feature with its corresponding Mech-Vision measurement project.
Before you use Mech-Metrics, you need to set up the Mech-Vision measurement solution and its measurement projects.

The correspondence between Mech-Metrics resources and Mech-Vision resources is summarized as follows:

The project association steps are as follows:

In the Configuration interface, select a feature in the left-side resource tree of the current part.

In the right-side parameter panel of the Configuration interface, click … next to the Name text field in the Mech-Vision Project section. Then, select the Mech-Vision project corresponding to this feature from the drop-down list.

If the drop-down list does not open after clicking …, please open the Mech-Vision solution to which the Mech-Vision project belongs in Mech-Vision.

The Mech-Vision project associated with a Mech-Metrics feature must include an Output Step to output the measured values of the feature.
If the Output Step of the project outputs only one feature (and has only one port named feature), the feature name in Mech-Metrics does not need to match the feature name output in the Output Step.
If the Output Step of the project outputs multiple features and requires using feature names for output, the feature name in Mech-Metrics must match the feature name output in the Output step.

Associate Mech-Vision Measurement Project for the Feature

We Value Your Privacy