Open the Solution Library

You are currently viewing the documentation for version 1.8.0. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

This section introduces how to open the Solution Library.

Open from the Welcome Interface

After you open Mech-Vision, click Create from solution library in the Welcome interface to open the Solution Library.

open solution library open solution library 1

There are some built-in resources in the Solution Library. If you want to view more solutions, click More at the bottom of the interface. Click Yes in the pop-up window to start loading.

open solution library open solution library 2

After the resources are loaded, you can see more solutions in the Solution Library, as shown below.

open solution library open solution library 3

Solution: a collection of configurations and data of robot communication, vision processing, path planning and other functions for implementing the vision application.
Featured: indicates that the solution can be widely used and its feasibility has been verified on site for many times.
Built-in: indicates that the solution is locally installed with the software, and there is no need to download it.

Open from the Main Interface

If you have already entered the main interface, you can open the Solution Library in either of the following three ways.

Click Create from Solution Library in the toolbar.
Select File Create from Solution Library in the menu bar.

Open the Solution Library

Open from the Welcome Interface

Open from the Main Interface

We Value Your Privacy